Add-on thermal camera MITO-03

MITO-03 is a thermal camera that can be installed on Axess TMC terminals to add body temperature measurement capability.

The temperature is measured at a distance of 0.5 meters with a maximum error of ± 0.2 °C. Adhesive signs for the correct positioning of the user in front of the terminal are included.

A terminal equipped with MITO-03, can combine personal identification with body temperature check.

Compatibility

MITO-03 can be installed on X3, X3BIO, X4, X7, SuperTRAX Light, SuperGLASS 7 Light.

Temperature

• MEMS thermal sensor. The sensors are individually calibrated by our laboratories. Temperature sensing distance: 0.5 m (Adhesive signs for the correct positioning of the user in front of the terminal are included)
• Temperature detection error: +/- 0.2 ° C
• Temperature resolution: 0.1 ° C
• Sensor working area: horizontal opening: 5 degrees
• Ambient operating temperature: from 18° up to 28° C

Operating modes

After successful identification, the body temperature of the user is measured. If the temperature is within the acceptable range the transaction is completed and transit through the gate (if present) is allowed.

If the temperature is too high the terminal signals the anomaly clearly on the display accompanied with acoustic signals.

Different behaviour can be configured:

• The gate remains locked and transaction is rejected.
• Passage is allowed and transaction accepted but recorded with a special reason code
• A Temperature-too-high flag is sent in real time to a server (https connection) that decides the behaviour and what to show on the display (online mode)

Note: Typical installation involves MITO-03 at 140 cm from the ground, tilted 25 degrees (first click of the bracket) and the user approximately 50 cm away.