1153 Bluetooth® Wearable RFID Reader with Imager2D

In stock

Compact, lightweight, and ergonomic

2D Imager

UHF RFID and 2D barcode data acquisition in a single integrated Bluetooth® device

Two trigger buttons

Micro USB cable and USB charger included


Wearable Bluetooth®UHF RFID reader 1153

The wearable UHF RFID reader with 2D imager is designed to communicate with a variety of host devices via Bluetooth® wireless technology.

The RFID reader chipset is optimized for low power consumption while providing excellent performance in a small and convenient form factor.

The reader includes high-performance 2D barcode data scanning to enable exceptional data collection transmission to connected devices.

Physical and Environmental Characteristics
Dimensions: 10.2 cm x 5.5 cm x 5.6 cm (LxWxH)
Weight (incl. battery): 157 g / 5.5 oz
User input: Two trigger buttons
User feedback: Speaker, vibration motor, three LEDs
Power: Removable, rechargeable 3.7 volt Lithium Polymer 1130 mAh battery pack, 4.2 watt hrs
Enclosure materials: Polycarbonate
Performance Characteristics
RFID Engine: ST ST25RU3993 based
Communication protocols: TSL® ASCII 2.0 parameterised command set.
Memory: Optional Micro SD card (maximum 32GB capacity supported). Up to 500 million date and time stamped EPCs can be stored on a 32GB Micro SD card (separate purchase from alternative supplier).
Compatible Host devices (Bluetooth®): Host device must have Bluetooth® wireless technology functionality supporting the Serial Port Profile
Compatible Host devices (USB): Any Bluetooth® Host supporting the Serial Port Profile (SPP) or Human Interface Device (HID) profile (Android, iOS, Linux, Mac, Windows).
Operating Temperature: -4°F to 140°F / -20°C to 60°C
Charging Temperature: 14°F to 104°F / -10°C to 40°C
Humidity: 5% to 85% non-condensing
Drop specification: Multiple drops to concrete: 4 ft./1.2 m ambient, 3ft / 0.9m across the operating temperature range
Tumble: 500 0.5 metre tumbles at room temperature (1,000 cycles)
Environmental Sealing: IP54
Electrostatic Discharge: ± 15kVdc air discharge; ± 8kVdc contact discharge
MIL-STD 810F: Meets and exceeds applicable MIL-STD 810F for drop, tumble and sealing
Rfid Performance
Standards supported: EPC Class 1 Gen 2
Nominal read range: up to 6.5 ft. /up to 2 m.
Nominal write range: up to 3.3 ft. /up to 1 m.
Field: 150-degree forward facing (approx.) measured from front of device
Antenna: Internal Circularly Polarized
Frequency Range: EU: 865-868MHz; US: 902-928MHz
Maximum Output Power: Up to 25dBm maximum
Barcode Scanning
Imager: TSL® custom 2D Barcode Scan Engine module
Sensor Resolution: 1280 x 960 pixels, rolling shutter
Field of View: Horizontal: 44.5°, Vertical: 33.5°
Focal Distance: From front of engine: 15.24 cm
Aiming LED: Green LED
Illumination: 1 warm ahite LED
Symbologies Supported: 1D: All major codes
2D: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal Dutch Postal (KIX)

More information in the attachment with the product sheet
Further Information
More Information
Product typeProducts
1153_en (963.39 kB) Download
Cookie Preferences
Copyright © 2024 Infordata Sistemi Srl. All rights reserved.